FT-378 Katsura Fountain
Assembly Instructions
rev 11/18/2021
Fountain Information:
• This fountain holds approximately 2 gallons of water.
• This fountain uses a small fountain cover: FTNCOV-SM
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Pump Kit Parts List
Image Component Quantity
PK 120-LV Pump with Transformer 1
#10 Stopper 1
2 1/2" length PermaGum 1
8" length of 1/2" black non-kink tubing 1
1" length of 5/8" clear tubing 1
1" length of 1/2" CPVC pipe 1
FT-378SPL-A
(Small spiller)
2
FT-378SPL-B
(Large spiller)
2
1 oz tube of silicone 1
Adhesive Dots 4
Wedges 2
Hose Clamps
1
Fountain Components
Image Item Description
Component
Item #
Quantity
Katsura
Fountain -
Water Feature
FT-378A 1
Katsura
Fountain - Basin
FT-378B 1
Proudly
MADE IN USA
SHOP NOW
SHOP NOW
To Next Page
Need help?
General
