6. The rearview camera should be installed at the rear end of the
car, normally the best place is above the number plate. The
camera can be fixed with the sticker or the screw. You can see
the diagram for reference.
7.T he excess RED lead near the rear view camera is used for
reverse status sensing. Connect the RED cable to the positive
lead of the reverse lamp power.
8. Mount the rear view camera behind the number plate, fix it with
screws or double-sided adhesive.There are 2 ways to mount the
camera:
a. Install the camera mount behind the number plate, you can
install it between the number plate and the car panel with the
double-sided adhesive.
Never Cover Any Information on the License Plate
3
W Y·6 6 7
W Y·6 6 7
To Next Page
Loading...