CAMPARK X15 - How to Start

How to start :
A.ChargethedetachableLi-ionbattery
1.Usea5V/2AstandardUSBadaptertochargethecamera
viaUSBcable,orconnectthecameratoyourcomputerto
chargethecamera.
2.Normallyitwilltakeabout2~3hourstofullychargethe
camera.
B.Howtousememorycard.
1.ThecamerausesMicroSDcardasstorage,capacityupto
64GBsupported,andtoensurenormalfunction,pleaseuse
highspeedmemorycard,Class10orabovecardsare
recommended.
2.Beforeusingthecamerapleaseinsertthememorycardfirst,
andformatthememorycardinsettingmenubeforeusing.
3.ThiscameradoesnotsupportHotswap,turnoffthecamera
beforeinsertingortakingoutthememorycard.
4.Insertthememorycardasindicatedbytheiconintotheslot
untilthecardtotallyinside.
5.Toremovethememorycard,gentlypresstheedgeof
thememorycarduntilitpopsout.
EN
6