Campbell Hausfeld PL1502 User Manual

ER
ga
ot
RUE
CAMPBELL.
HAUSFELD
=
PROF
fee
©
OPERATING
INSTRUCTIONS
|
IMPACT
WRENCH
E
S
S10
N
A
L|
\opeis
PL1502,
PL1536,
PL1556
AND
PL1557
READ
CAREFULLY
BEFORE
ATTEMPTING
TO
ASSEMBLE,
INSTALL,
OPERATE
OR
MAINTAIN
THE
PRODUCT
DESCRIBED.
PROTECT
YOURSELF
AND
OTHERS
BY
OBSERVING
ALL
SAFETY
INFORMA-
TION.
FAILURE
TO
COMPLY
WITH
INSTRUCTION
S
COULD
RESULT
IN
PERSONAL
INJURY
AND/OR
PROPERTY
DAMAGE.
RETAIN
INSTRUCTIONS
FOR
FUTURE
REFERENCE.
Description
Professional
impact
wrenches
are
air
tools
designed
for
removing
and
installing
nuts
and
bolts
such
as
lug
nuts,
exhaust
system
clamps,
etc.
A
Unpacking
When
unpacking
this
product,
carefully
inspect
for
any
damage
that
may
have
occurred
during
transit.
Make
sure
any
loose
fittings,
bolts,
etc.,
are
tightened
before
putting
this
product
into
service.
General
Safety
Information
“This
product
is
a
part
of
a
high
pressure
system
andthe
ollowing
safety
precautions
must
be
followed
at
all
times
along
with
any
other
existing
safety
rules.
‘wha
1.
Read
all
manuals
included
with
this
product
care-
+
fully.
Be
thoroughly
familiar
with
the
controls
and
“a
the
proper
use
of
the
equipment.
2.
Only
persons
well
acquainted
with
these
rules
of
safe
operation
should
be
allowed
to
use
the
air
tool.
À
DANGER
A
RUE
DO-NOT
EXCEED
MAXIMUM
OPERATING
PRES-
SURE
OF
THE
AIR
TOOL
(90
PSI).
THE
AIR
TOOL
COULD
EXPLODE
AND
RESULT
IN
DEATH
OR
SERIOUS
PERSONAL
INJURY.
3.
Do
not
exceed
any
pressure
rating
of
any
compo-
nent
in
the
system.
4.
Disconnect
the
air
tool
from
air
supply
before
changing
tools
or
attachments,
servicing
and
dur-
ing
nonoperation.
5.
Always
wear
safety
glasses
during
operation.
6.
Do
not
wear
loose
fitting
clothing,
scarves,
or
neck
ties.
Loose
clothing
may
become
caught
in
moving
E
parts
and
result
in
serious
personal
injury.
7.
Do
not
wear
jewelry
when
operating
any
tool.
Jewelry
may
become
caught
in
moving
parts
and
result
in
serious
personal
injury.
8.
Do
not
depress
trigger
when
connecting
the
air
supply
hose.
General
Safety
(Continued)
9.
Always
use
attachments
designed
for
use
with
air
powered
tools.
Do
not
use
damaged
or
worn
attach-
ments.
|
À WARNING À
DO
NOT
USE
HAND-TOOL
SOCKETS.
USE
IM-
PACT-QUALITY
SOCKETS
ONLY.
HAND-TOOL
SOCKETS
ARE
"GLASS-HARD"”
AND
WILL
SHAT-
TER
AND CAN
CAUSE
SERIOUS
PERSONAL
IN-
JURY
IF
USED
WITH
AIR
TOOLS.
10.
Never
trigger
the
tool
when
not
applied
to
a
work
object.
Attachments
must
be
securely
attached.
Loose
attachments
can
cause
serious
injury.
11.
Protect
air
lines
from
damage
or
puncture.
12.
Never
point
an
air
tool
at
oneself
or
any
other
person.
Serious
injury
could
occur.
13.
Check
air
hoses
for
weak
or
worn
condition
before
each
use.
Make
sure
all'connections
are
secure.
RELEASE
ALL
PRESSURE
FROM
THE
SYSTEM
BEFORE
ATTEMPTING
TO
INSTALL,
SERVICE,
RELOCATE
OR
PERFORM
ANY
MAINTENANCE.
14.
Keep
all
nuts,
bolts
and
screws
tight
and
ensure
equipment
is
in
safe
working
condition.
15.
Do
not
put
hands
near
or
under
moving
parts.
Operation
LUBRICATION
Proper
lubrication
is
the
owners
responsibility.
Failure
to
lubricate
the
air
tool
properly
will
dramatically
shorten
the
life
of
the
tool
and
will
void
the
warranty.
ACAUTION
This
impact
wrench
REQUIRES
lubrication
BE-
FORE
the
initial
use
and
BEFORE
and
AFTER
each
additional
use.
impact
wrenches
require
lubrication
throughout
the
life
of
the
tool
and
must
be
lubricated
in
two
separate
areas:
IN240100AV 3/94

Campbell Hausfeld PL1502 Specifications

General

Brand	Campbell Hausfeld
Model	PL1502
Category	Impact Driver
Language	English

Summary

OPERATING INSTRUCTIONS

Product Description

Professional impact wrenches are air tools designed for removing and installing nuts and bolts like lug nuts.

Unpacking and Inspection

Inspect product for damage incurred during transit and tighten loose fittings before putting into service.

General Safety Information

High Pressure System Safety

Follow safety precautions for high-pressure systems; disconnect air supply before servicing or nonoperation.

WARNING: Socket Safety

Use impact-quality sockets only; hand-tool sockets can shatter and cause serious personal injury.

WARNING: Maintenance Safety

Release all pressure from the system before attempting installation, service, relocation, or maintenance.

Operation and Lubrication

Lubrication Requirements

Proper lubrication is owner's responsibility; failure voids warranty. Lubricate before initial and after each use.

Air Motor Lubrication Procedure

Lubricate the air motor daily by pouring oil into the air inlet while operating the tool.

Impact Mechanism Lubrication

Lubricate the impact mechanism monthly by adding oil to the oil port hole.

Air Hose Hook-up and Speed Adjustment

Recommended Air Hose Hook-up

Illustrates a recommended air hose hook-up with filter and oiler; avoid quick couplers between wrench and leader hose.

Hose Size Recommendations

Details recommended hose ID and fittings for different models to prevent pressure drop and maintain power.

WARNING: Hose Handling

Never carry tool by hose or pull hose to move; keep hoses away from heat, oil, and sharp edges.

Speed Adjustment and Torque Setting

Use torque wrench to set torque. Adjust regulator for speed; max for removal, min-medium for installation.

Storage and Troubleshooting

Storage Lubrication

Lubricate before storing; run the impact wrench for 2-3 seconds to leave residual oil for storage.

General Troubleshooting Guide

Addresses common issues like slow operation, moisture, and provides corrective actions.

Impact Mechanism Troubleshooting

Covers issues like slow impacting, inability to remove bolts, or no impact, with causes and solutions.

Technical Service and Warranty

Technical Service Contact

Provides phone numbers for operation, repair assistance, and replacement parts information.

Limited Warranty Details

Details warranty duration, coverage, exclusions, and purchaser responsibilities for repairs.