Need help?Do you have a question about the Campbell Hausfeld VT6195 and is the answer not in the manual?
General| Model | VT6195 |
|---|---|
| Tank Capacity | 6 gallons |
| Max Pressure | 125 PSI |
| Voltage | 120V |
| Maximum Pressure | 125 PSI |
| CFM @ 40 PSI | 4.0 CFM |
| Phase | Single |
| Pump Type | Oil-lubricated |
| Tank Size | 6 gallons |
| Amperage | 15 Amps |
| Horsepower | 3.7 HP (Peak) |
Introduction, quick reference for oil, and unpacking instructions for the compressor.
Essential safety guidelines, warnings, and symbols to prevent injury and equipment damage.
Detailed safety warnings, symbols, and California Proposition 65 information.
Technical specifications including motor HP, air delivery, PSI, tank capacity, and dimensions.
Guidance on location, tank mounting, piping, shut-off valves, wiring, and grounding.
Procedures for installing the air inlet filter and filling the compressor with oil.
Break-in period, pressure switch operation, and draining the tank.
Explanation of normal oil accumulation at the crankcase breather during operation.
Diagnosing issues like low pressure, overheating, noise, oil in air, and water in air.
Troubleshooting repeated reset cutouts, blown fuses, and pressure switch malfunctions.
Guidelines for checking safety valve, tank, lubrication, air filter, and components.
Instructions for belts, storage, and locating repair parts with illustrations.
Details on the compressor's warranty duration, coverage, exclusions, and purchaser responsibilities.
To Next Page