4. Select the IPPort in the Network Map. Enter the CELL200 series IP address (public static IP)
or the Konect PakBus Router DNS address (private dynamic IP), along with the port
number. The address and port number are input in the Internet IP Address field separated
by a colon. Preceding zeros are not entered (for example, 070.218.074.247 is entered as
70.218.74.247). When not using Konect, the default port number is 6785.
5. For PakBus data loggers, leave the default settings for the PakBusPort. PakBus Port Always
Open should not be checked. If used, enter the TCP Password.
CELL200-Series 4G LTE Cellular Module 34
To Next Page
Loading...
