CAMSO ATV T4S User Manual (English)

Other manuals for CAMSO ATV T4S

Questions and Answers:

Ebony BaileyAug 12, 2025

How to fix overheating of CAMSO ATV T4S guiding components?

C
Claudia HintonAug 12, 2025
If you notice your CAMSO Automobile Accessories system guiding components overheating, accompanied by a burned rubber or plastic odor, it could be due to several reasons. A wheel might be blocked, in which case you should try to free the wheel and replace it if necessary. The system could also be misaligned; correct the track system alignment. Constant turning or uninterrupted use in rutted trails can also cause overheating. Vary your turning radius and seek areas that can help lubricate the system, or vary your line out of ruts and seek areas that can help lubricate the system.

Ray BowersAug 16, 2025

What to do if my CAMSO Automobile Accessories experience loss of power?

C
Christopher MitchellAug 16, 2025
Loss of power in your CAMSO Automobile Accessories could stem from several issues. The track tension might be too high, so lowering it could resolve the problem. Ensure that the sprockets are free of mud, snow, or any other contaminants; an optional Sprocket Scraper kit is available through Customer Service. Remove any ice or snow buildup on the wheels and clear all compacted snow between the frame and wheels. Snow infiltration in the vehicle’s air intake or clutch system can also cause power loss; if this occurs, remove the snow and contact your dealer immediately.

Brand

Model

ATV T4S