Need help?Do you have a question about the Camsoy Smart Life Camera C6 and is the answer not in the manual?
General| Video Resolution | 1080P |
|---|---|
| Night Vision | Yes |
| Two-Way Audio | Yes |
| Motion Detection | Yes |
| Storage | Cloud Storage, Micro SD Card (Max 128GB) |
| Micro SD Card Support | Up to 128GB |
| Night Vision Range | Up to 10 meters |
| Operating Temperature | -10°C to 50°C |
Recommended Class10 or above, max support 64GB. Format card before use. Pay attention to direction.
Connect to power or press button for 3s. Indicator shows initialization. Blue flashes slowly for AP mode.
Flicker indicates no card. No hot swap. Turn off camera before insert/remove.
Long press confirmation button for 5s. Indicators flash 7 times and turn off.
Connect to iCooky_***** WiFi (password 12345678). Effective range is 10 meters.
In iCookyCam APP, click '+', select 'Not connected', enter password 'ok123456', then 'Yes'.
Enter UID and default password 'ok123456' in the 'Add Device' interface.
Click 'Yes' to proceed to Wi-Fi network setup.
Choose the desired network and input the correct Wi-Fi password.
Camera restarts after connect. Red indicator flashes slowly for IP connection mode.
Select 'No' to 'Connect to the router?' for AP connection. Add camera to device list.
Double click Confirmation button to switch from IP to AP connection mode.
Connect to same WiFi, use 'Lan Search' to find cameras, input password 'ok123456'.
Generate QR code from existing device, scan with another phone's APP.
In 'Lan Search', select manual add button and input UID and password in 'Add Device'.
Displays camera name, QR code button, and options to check video/photo.
Shows video screen, resolution, online status, time, snapshot, and settings.
Options include changing password, Wi-Fi settings, indicator status, and factory reset.
To Next Page
