Problem
Selecting the
distribution button(A-
B) you cannot get a
beverage
Solution
1) Fill the tank with water
2) Check if the water tank is well located
3) Lift the lever to permit air outlet take the capsule
off and wait for a while to let the pump be
cool, close the lever again and select the
distribution button(A-B)
4) Empty the capsule receptacle and reset the
coffee function: turn the machine off and on
again switching the main switch (9) off and on
If you cannot solve the problem, you are kindly requested to contact
your service center
The capsule is not
ejected
Close the lever (1), then slowly open it again
Press the start button (A-B) and slowly open the lever as water is being
delivered (1)
The lever (1) will not
slide properly
Press the start button (A-B), then open and close the lever (1) several
times while water is being dispensed
19
24