Do you have a question about the C&K systems Sierra S5030 and is the answer not in the manual?
Category | Security System |
---|---|
Model | Sierra S5030 |
Partitions | 2 |
Backup Battery | 12VDC, 7Ah |
Power Supply | 16.5VAC, 25VA |
Describes the system's components and general function.
Explains the sequence of events during an alarm.
Discusses system customization by the installer.
Details the learning period for new systems.
Identifies features and functions of the keypad.
Explains the meaning of various LED indicators.
Describes how to use panic and emergency keys.
Covers entering, assigning, changing, correcting, and deleting codes.
Details Master, Basic, Kidwatch, Maid, Duress, and Relay codes.
Guidance on choosing user numbers based on privileges.
Details Full, Home, Instant Home, and Automatic arming.
Covers arming without a user code.
Explains Force, Chirp-Alert, and Goof-Proof Arming.
Describes manual and quick bypassing of zones.
Covers Extended Exit Delay, Keypad Lockout, Quick Exit.
How to abort an arming command.
Explains entry delay and the disarming process.
Details the system disarming itself at set times.
Covers canceling alarms and resetting after an alarm.
Tips and methods to avoid unwanted alarms.
Discusses Alarm Lockout and Silent Alarm.
Instructions to configure date and time.
Covers warning tone and chime settings.
How to manage the keypad's illumination.
Steps to set days for relay activation.
Guide to testing system functions without triggering alarms.
How to check recorded system events.
Instructions for testing bells, sirens, and batteries.
How to initiate remote system configuration.
Explains common keypad messages and their meanings.
Steps to diagnose and resolve service conditions.
Explains how buildings are divided into zones or areas.
How partitioning affects different user code types.
Lists pre-assigned user numbers for partitioned systems.
Procedures for changing user codes within specific areas.
How areas influence keypad and system functions.
Installer-filled section for system setup details.
Fields for specific system settings and delays.
Guidelines for installing smoke detectors.
Steps for creating and practicing an emergency plan.
Definitions of key terms used in the manual.