C&T International 740 VICK CRIB User Manual

-----
~-
C& T International Inc.
46 Whelan Road
East Rutherford, NJ 07073
MODEL #740 VICK CRIB
ASSEMBLY INSTRUCTIONS
•
INSTRUCCIONES DE ASSEMBLA.JE
CAUTION
Any mattress used in this crib must be at least 271/4 inches (69cm) by 51 5/8 (131cm) with a
thickness not to exceed 6 inches (15cm).
This crib conforms to all applicable regulations promulgated by the consumer product safety commission.
Upon completion of assembly, be sure all screws, bolts and fastening devices have been securely tightened.
A frequent check should be made of all screws, bolts and fastening devices and tightened if needed.
A W' ARN ING· Failwe t9 follow these warnings and assembly instructions could result in
~ 1-\ • Senous Injury or death.
- Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
-Before each usage or a§Sembly, inspect crib for damage hardware, loose joints, missing parts or sharp edges.
DO NOT use crib if any parts are missing or broken. Ask your dealer or write to C&T International for replacement parts
and instnictionall~erafure if needed. DO NOT substitute parts.
- After raising side, make sure latches are secure.
-When child is able to climb out or reaches the height of 35 in. (90cm), the crib shall no longer be used.
- DO NOT place crib near window where cords from blinds or drapes may strangle a child.
-Strings can cause strangulation I Do not place ttems with a string around a child's neck, such as hood strings or pacifier
cords. Do not suspend strings over a crib or attach strings to toys. .
-If
refinishing, use a non-toxic finish specified for children's produtcs.
-DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position whenever child is in crib.
-When c~i1d is able to pull to standing positio~, s~t mattress to lowest position and remove bumper pads, large toys and,
other objects that could serve as steps for climbing out. .
-Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
-DO NOT use a water mattress with this crib.
- The product including side rails must be fully erected prior to use.
-Check fastemers periodically, do not over tighten. This may cause distortion or breakage.
-Keep wall decorations, especially those with strings, completely out of a child's reach.
-DO NOT tie pacifiers, necklaces, or any other items around a child's neck or on crib parts. This could cause strangulation
-Use a crib as a crib, not as a play yard. Remember that a crib is not a substttute for a parenfs supervision.
- Parents should ensure a safe environment for their child by checking the crib regularly before placing tbe child in the
product. Please make sure that every component is prope~y and securely in place ..
For cribs equipped with teething rails: - Replace teething rail if damaged or loose.
11. Never leave infant alone in crib with sides down
DO NOT leave child alone in crib with side lowered. Be sure side is in
raised and locked position whenever child is in crib.
If you find that your furniture has a missing or damage part, contact your local C& T dealer.

C&T International 740 VICK CRIB Specifications

General

Brand	C&T International
Model	740 VICK CRIB
Category	Baby & Toddler Furniture
Language	English

Summary

Assembly Instructions

General Cautions

Provides essential safety precautions and warnings for crib usage.

General Warnings

Highlights critical safety warnings to prevent serious injury or death.

Infant Safety: Side Down

Ensures infant safety by requiring the crib side to be raised and locked.

Cleaning Instructions

Details the recommended method for cleaning the crib surfaces with mild solutions.

Product Material Description

Explains the natural variations in wood grain and appearance ('Nature's Mystery').

Hardware List

Lists all hardware components required for crib assembly with their specifications.

Parts List

Identifies all individual parts of the crib for assembly and inventory.

Assembly Steps

Secure the Headboard

Instructions for assembling the headboard to the side panels using specific hardware.

Secure the Front Panel

Guidance on attaching the front panel (footboard) to the crib sides.

Secure the Mattress Support

Details on how to attach the mattress support to the side panels.

Convertible Bed Usage

Using as a Toddler Bed

Steps and considerations for converting the crib into a toddler bed.

Using as a Full Bed

Instructions and requirements for converting the crib into a full-size bed.