Candy Brava CDPMN 4S622PX/E - Language Selection Procedure; Accepting Language Selection; ECO Programme Display; Automatic Switch-Off Timer

105
EN
 In this phase only the "SMART DOOR"
"TABS" and "START/RESET" buttons
will remain active. The message "BRAVA"
will appear on the display and all the
indicator lights will turn on for 3 secs.
 The message "ENGLISH" will appear on
the display.
 Pressing the "SMART DOOR" or
"TABS" buttons you can select the
preferred language.
 To accept the language selection press
the "START/RESET" button Immediately
afterwards the "WELCOME" message
will scroll on the display once and the
indicator lights will all be off.
 The message of the "ECO 2:50" or
"ECO 3:25" programme (with SMART
DOOR option activated)
 "ECO" will appear on the display.
The dishwasher is regulated with certain
factory settings. Nevertheless, from the
Settings menu, you can adjust various
parameters to suit your washing
requirements.
Accessing the Settings Menu
 Turn on the dishwasher by holding the
"ON/OFF" button down for about 3 secs.
 Hold down the "PROGRAMME
SELECTION" and "ON/OFF" buttons for
about 5 secs.
 The message "SETTINGS" will appear
on the display and the indicator lights of
the "SMART DOOR" and "TABS" buttons
will be on.
 Pressing the "PROGRAMME
SELECTION", You can select the
parameters to be adjusted in succession
(LANGUAGE → SOFTENER →
BUZZER → MEMO FUNCTION).
 Parameter adjustment is performed by
pressing the "SMART DOOR" and
"TABS" buttons.
 To adjust the SOFTENER see the specific
Chapter of the manual.
 To adjust the BUZZER see the specific
paragraph.
 To adjust the MEMO FUNCTION see the
specific paragraph.
Press the START/RESET button; the "ECO"
programme will appear on the display.
 Press the the TABS and HALF LOAD
buttons together for 5 seconds.
 "ENGLISH" appears on the display.
 Follow the steps detailed in the
"LANGUAGE SETTING" paragraph.
WARNING
This procedure will cancel all stored
settings, and the appliance will be
reset to the default factory settings.
Changing language
If memo mode is enabled, the last used
programme will appear on the display.
Next time you switch on the
appliance
The dishwasher must ALWAYS be off
before you start this procedure.
Settings Menu
WARNING
In the event that the machine remains
switched on without selecting or
starting any program, after 5 mins. the
dishwasher will switch off automatically.