EN 3
USE
➀ ON/OFF key, used to switch on/off the appliance.
➁ Mode key, used to adjust the temperature or to select Super Cool or Eco functions.
➂ Cooling levels, show which is the selected cooling level.
➃ Super Cool icon, shows if the function is activated.
➄ Eco icon, shows if the function is activated.
Use
Plug on the appliance, it automatically turns on. The temperature will automatically set at
2.
NOTE: wait at least 2/3 hours before putting food in the appliance, so as to ensure the
temperature inside the fridge.
To change the temperature, press the mode key. When the setting increases, the
corresponding LED light will turn on. An acoustic signal is made every time the Mode key
is pressed and the temperature is changed. After 5 seconds without pressing any key, the
setting is confirmed and an acoustic signal is made.
NOTE: 1 indicates the highest temperature, while 4 indicates the lowest temperature.
In case of power loss, the last cooling level set is restored.
To restore the default setting, with the door closed, press the ON/OFF key for 5 seconds.
Under the normal operating condition (in spring and autumn), it is recommended to set the
temperature at 2. In summer when the ambient temperature is high, it is recommended to
set temperature at 1-2, so as to guarantee the fridge and freezer temperatures and reduce
the refrigerator continuous running time; and in winter when the ambient temperature is
low, it is recommended to set temperature at 3-4 to avoid frequent start/stop of the
refrigerator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
