8
For safety reason, please use only the
same size of fixing or mounting screw
which are recommended in this instruction
manual.
Warning: Failure to install the screws or
fixing device in accordance with these
instructions may result in electrical
hazards
4. OPERATION
5.1 Connect the plug into the power.
5.2 Push the switch ① into “ ”, the lamp be on; push into “0”, the lamp
be off.
5.3 Push the switch ② into “I、II”, the motor will be on “low、high” two
speeds, push into “0”, the motor will be off.
5.4 The cooker hood will working at low or high speed when pull out the
front panel.
To Next Page
Loading...
