Candy CE 104/1 - SETTING UP INSTALLATION; Plug Replacement & Wiring Guide; Fuse & Plug Requirements; Initial Power On & Indicator Light

ELECTRICAL CONNECTIONS
If the plug we supply does not fit
CUT IT OFF AND DESTROY IT!
You can't use it on other appliances, and the exposed wires
could be dangerous If plugged In.
To fit a replacement plug, proceed as follows:
Connect
green and yellow wire
blue wire
brown wire
to the terminal in the plug
marked with the letter E,
OR marked
with the symbol, ~ — —
OR coloured green,
OR coloured green and
yellow.
marked N
OR coloured black.
marked L
OR coloured red.
WARNING
This appliance must be earthed
Fuses and plugs
This appliance should be used only on a socket with a
minimum rating of 13 Amp.
Our ready-fitted plug Is already equipped with a 13 amp fuse
which Is BS 1362 ASIA approved. Any replacement should be
exactly the same.
If the fuse cover is lost, do not use the plug until It Is replaced.
A correct replacement fuse cover (obtainable from your
local retailer) must be the same colour as shown or named
on the insert on the base of the plug.
p ress foe ON/OFF (page 12, button C) button. The power on
(page 12, indicator G) light will light up. If this does not light
up see faults search.
P
H