To Next PageTo Next PageWhat to do if the light and motor don't work on my Candy CFT610/5X Ventilation Hood?
If the light and the motor of your Candy Ventilation Hood aren't working, check the house fuses and reset or replace them if necessary. Also, ensure the power cord is properly fitted to the power outlet and the outlet is switched on.
How to fix lights not working on Candy CFT610/5X Ventilation Hood?
If the lights on your Candy Ventilation Hood are not working, the issue might be with the globes. Replace the globes as per the instructions provided.
Why is the light on but the motor not working on my Candy Ventilation Hood?
If the light is on but the motor of your Candy Ventilation Hood isn't working, first, make sure that a fan switch position is selected. If the issue persists, it may be due to a fan switch or motor failure.
What to do if my Candy CFT610/5X is leaking oil?
If you notice oil leaking from your Candy Ventilation Hood, it could be due to the one-way valve and outlet not being tightly sealed. In this case, take down the one way valve and seal with sealant. Alternatively, the leakage might be from the connection of the chimney and cover, so take the chimney down and seal it.
How to improve suction on a Candy CFT610/5X Ventilation Hood?
If your Candy Ventilation Hood has insufficient suction, the distance between the cooker hood and the gas top may be too far. Refit the cooker hood to the correct distance.
How to fix a Candy CFT610/5X Ventilation Hood that inclines?
If your Candy Ventilation Hood inclines, the fixing screw may not be tight enough. Tighten the hanging screw to make it horizontal.
General| Width | 60 cm |
|---|---|
| Maximum Extraction Rate | 600 m³/h |
| Number of Speeds | 3 |
| Lighting | LED |
| Lighting Efficiency Class | A |
| Grease Filtering Efficiency Class | B |
| Number of Motors | 1 |
| Control Type | Mechanical |
| Material | Stainless Steel |
| Type | Wall-mounted |
| Filter Type | Aluminium |
