7
2. Unscrew and lift the lid from the rear and remove it, then lift the door and place it on a padded
surface to prevent it scratched.
3.Remove the upper hinge core, transfer it to left side and tighten securely, then put it in a safe place
4. Remove both adjustable feet and remove the bottom hinge bracket by unscrewing the bolts.
5. Replace the lid by fitting the upper hinge core into the upper door’s hole, securing it with the 2
screws. Replace the screw covers.
Warning!
When changing the side at which the door opens, the appliance must not be connected to the mains.
To Next Page
Loading...
