Candy CITY COMBI - Page 301

2
• Install and level the
appliance in an area
suitable for its size
and use.
• Make sure that the
electrical information
on the rating plate
agrees with the
power supply. If it
does not, contact an
electrician.
• The appliance is
operated by a 220-240
VAC/50 Hz power
supply. Abnormal
voltage fluctuation
may cause the
appliance to fail to
start, or damage to
the temperature
control or
compressor, or there
may be an abnormal
noise when operating.
In such case, an
automatic regulator
shall be mounted.
• Only for UK:
The appliance’s
power cable is fitted
with 3-
cord (grounding) plug
that fits a standard
3-cord (grounded)
socket. Never cut off
or dismount the
third pin
(grounding). After
the ap- pliance is
installed,
the plug should be
accessible.
• Make sure that
mains cable is not
caught under the
appliance during
and after
carrying/moving the
appliance, to avoid
the mains cable
becoming cut or
damaged. If the
supply cord is
damaged, it must be
replaced by the
manufacturer, its
service agent or
similarly qualified
person in order to
avoid a hazard.