Why Candy Washer does not function on any program?
If your Candy Washer doesn't function on any program, there are several things to check: * Ensure the mains plug is properly inserted. * Verify the mains switch is turned on. * Check for a power supply. * Inspect the electric circuit fuses. * Make sure the load door is fully closed.
Why Candy GOY 1050 D Washer has strong vibrations during spin?
If you're experiencing strong vibrations during the spin cycle of your Candy Washer, it could be due to a few reasons: 1. The washing machine might not be perfectly level; try adjusting the special feet. 2. The transport bracket may not have been removed; ensure it is removed. 3. The washing load might not be evenly distributed; redistribute the washing evenly inside the drum.
Why Candy GOY 1050 D does not spin?
If your Candy Washer isn't spinning, it could be due to these reasons: * The washing machine may not have discharged water yet; wait a few minutes. * The setting “No spin” may be selected (available on some models only); turn the program dial to the spin setting.
What to do if Candy GOY 1050 D does not discharge water?
If your Candy Washer isn't discharging water, check these potential causes: * The discharge tube might be bent; straighten it. * There could be odd material blocking the filter; inspect the filter.
What does error 2 mean on Candy Washer?
If the display of your Candy Washer reads error 2, it indicates there is no water fill. Please check that the water supplies are turned on.
Important safety precautions to follow during use and maintenance.
Explanation of buttons like Start/Pause, Temperature, Spin, and display indicators.
To Next Page
General
