44
4) Carefully cut the securing strap that holds the main cord
and the drain hose.
5) Us
e the 4 feet to level the machine with the floor:
A) Turn the nut clockwise to release the screw adjuster of
the foot.
B) Rotate foot to raise or lower it until it stands firmly on
the ground.
C) Lock the foot in position by turning the nut anti-
clockwise until it comes up against the bottom of the ma-
chine.
ATTENTION!
Should it be necessary to replace the supply cord, connect the wire in accordance with the
following colours/codes:
BLUE - NEUTRAL (N)
BROWN - LIVE (L)
YELLOW-GREEN - EARTH ( )
If the appliance’s power cable should ever need replacing, consult the Authorized Techni-
cal Support Service.
To Next Page
Loading...
