Use front feet to level the machine with the floor.
a) Turn the nut clockwise to release the screw adjuster of the
foot.
b) Rotate foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut anti-clockwise
until it comes up against the bottom of the machine.
Ensure that the Off/On button (C) is not pressed.
Ensure that all the knobs are on the ā0ā position and that the
door is closed.
Insert the plug.
After installation, the appliance must be positioned so that
the plug is accessible.
Press the START (C) button. The power on (N) light will light up.
If this does not light up see faults search.
EN
35
To Next Page
Loading...
