EasyManua.ls Logo

Canine Innovations Pet Convincer II User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Pet Convincer II User’s Guide
Congratulations! You have purchased the
most comprehensive, pain free, humane and
safe pet training device ever created!
With proper use, your pet (dog/cat) will
quickly learn what behaviors are off limits.
As with any tool, the Pet Convincer II is most
effective when used correctly. Please take a
moment to read through this user’s guide so
that you and your pet can get on the road to
enjoyable companionship!
The Device.
There are three (3) major components to the
Pet Convincer II:
1. Head trigger, nozzle, lock
2. Body (acts as a Hand Grip)
3. Cartridge (CO2; inside the Body)
Getting Started:
IMPORTANT: You should get acquainted
with the Pet Convincer II BEFORE you
attempt to use it. Make sure that these
procedures are accomplished away from your
pet and children. Do not let children use the
Pet Convincer II. It is not a toy!
Loading the Device:
Threaded CO2 Cartridge: Grasp the Body
of the device with one hand and the Head
with the other. Pull off the Head assembly
from the Body and separate the two parts.
a) Without depressing the trigger lever,
screw the Cartridge slowly into the treads in
the Head until the Cartridge begins to contact
the puncture pin.
b) Quickly continue screwing in the
Cartridge until hand tight (cannot be
turned/screwed in anymore by hand,
without excessively overtightening.
Also see NOTE below.)
This punctures (activates) and seals
the CO2 Cartridge to the Head.
Reattach (push) the Body onto the
Head, with the finger nubs in-line
with the trigger side of the device.
(See images a & b)
NOTE: You may hear a little “puff” as the
Cartridge is screwed on. No unwanted,
escaping CO2 leakage/hissing air occurs if
the Cartridge seals correctly to the Head.
Only when the Cartridge is empty, unscrew
the empty Cartridge and please recycle the
steel cylinder as locally appropriate.
c) Safety Lock Feature: Using your
thumb, move the red safety lever lock to the
“up” position to lock the trigger lever.
Moving the red safety lever lock to the
“down “position unlocks the front CO2
trigger lever and ONLY then allows CO2 to
be dispensed by the Pet Convincer II.
(See image c)
Question and Answer IconNeed help?

Do you have a question about the Canine Innovations Pet Convincer II and is the answer not in the manual?

Canine Innovations Pet Convincer II Specifications

General IconGeneral
BrandCanine Innovations
ModelPet Convincer II
CategoryPet Care Product
LanguageEnglish

Summary

Loading the Device

Threaded CO2 Cartridge Loading

Screw the CO2 cartridge into the head until hand-tight to activate the device.

Safety Lock Feature Operation

Use the red lever to lock or unlock the trigger for safe operation.

Safety First

General Safety Guidelines

Store at room temp, inspect for damage, maintain min distance, avoid sensitive areas.

Using the Device

Interruption and Discouragement Technique

Create scenarios, give verbal warning, spray near shoulder blade, praise compliance.

Positive Reinforcement

Praise good behavior and compliance after correcting unwanted behavior for effective training.

Related product manuals