To Next PageTo Next Page
Need help?Do you have a question about the Cannon Fitzroy FITZIB-PDEX series and is the answer not in the manual?
General| Brand | Cannon |
|---|---|
| Model | Fitzroy FITZIB-PDEX series |
| Category | Gas Heater |
| Language | English |
Outlines conditions and exclusions that void the product warranty.
Provides steps for initiating a warranty claim and necessary documentation.
Emphasizes licensed installation for warranty compliance and safety.
Crucial 'DO NOT' instructions for safe operation and installation.
Steps to take if you smell gas and general safety advice.
Guidelines on heater placement, materials, and prohibited usage.
Step-by-step guide for turning the heater on, off, and adjusting settings.
Instructions for cleaning the heater and its components.
Information on normal flame behavior and essential operational advice.
Lists available accessories like spacer kits, surrounds, and remote thermostats.
Refers to separate instructions for installing the console kit.
Details gas type, consumption, output, pressure, and electrical requirements.
Specifies required cavity and overall dimensions for Fitzroy installation.
Lists compatible optional accessories for the Fitzroy model.
Details gas type, consumption, output, pressure, and electrical requirements.
Specifies required cavity and overall dimensions for Canterbury installation.
Lists compatible optional accessories for the Canterbury model.
Required distances for flue terminals from building structures and openings.
Shaded areas indicating where flue terminals cannot be installed.
General installation requirements, clearances, and safety notes.
Guidance on flue types, extended flue kits, and cavity preparation.
Specific dimensions for brick or mock fireplace openings.
Steps for preparing the installation cavity, including flue and drain holes.
Instructions for attaching flexible hoses to flue outlets and air inlets.
Detailed steps for connecting flexible pipes to the flue terminal and cover.
Guidance on fixing the terminal cover to the external wall.
Step-by-step guides for removing Fitzroy and Canterbury model fascias.
Instructions on how the fascia should be attached to the heater.
Details voltage, socket requirements, earthing, and wiring practices.
Instructions for correctly positioning the gas logs on the burner bed.
Steps for connecting the gas supply pipe to the heater and testing.
Guidance on securing the heater and testing for gas leaks.
Step-by-step guide to check and adjust burner gas pressures.
Checks for stable flame and troubleshooting unstable flames.
Essential safety steps before performing any service.
Guides for replacing gas valve, ignition module, and electronic controller.
Steps for replacing the burner assembly and spark/sense electrodes.
Guide for replacing the fan pressure switch and its connections.
Configuration for Natural Gas, LPG, and audio beep functions.
Steps for removing and replacing the room circulation fan.
Detailed procedure for replacing the combustion fan assembly.
Visual representation of the heater's electrical connections and components.
Interpreting LED indicators and checking for power supply problems.
Troubleshooting common faults based on specific error codes.
Faults related to fan pressure signals and condensate in tubes.
Addresses issues like no gas to burner and fuse blowing.
