Canon BP-110 - User Manual

Battery BP-110 Using Instruction
Take Canon camera LEGRIA HF R26 for example
1. How to use
(1).Take BP-110 battery out from package (as Picture 1), then put it into camera (as
Picture 2)
(Picture 1) (Picture 2)
(2). Press the power button of the camera to switch it on (as Picture 3). The camera will
display that the battery could not be connected (as Picture 4). Select “yes” to continue.
(3). There’s no power indicator because the battery is not full-decoded (as picture 5).
But it will not affect the use of the battery.

Summary

How to Use the Battery

Battery Installation

Insert the BP-110 battery into the camera after taking it out of the package.

Power On and Connection Message

Turn on the camera and select 'yes' to continue if a battery connection message appears.

Power Indicator Explanation

No power indicator due to incomplete decoding, but battery use is unaffected.

How to Charge the Battery

Charging Methods Overview

Two methods for charging: using specified charger or directly in camera with AC power cord.

Direct Charging Procedure

Connect AC power cord to the 5.3V port; CHG LED turns red and flickers during charging.

Full Charge Indicator

When the battery is fully charged, the camera's CHG LED turns off.

Canon BP-110 Specifications

General

Product color	Gray
Battery voltage	- V
Battery capacity	- mAh
Compatible products	Canon LEGRIA HF R26, R28, R206
Number of batteries included	1 pc(s)
Internal	Yes
Purpose	Camcorder

Weight and Dimensions

Weight	- g