Canon EF80-200mm f/4.5-5.6 USM User Manual

y
EF55-200mm f/4.5-5.6 USM
EF55-200mm f/4.5-5.6 II USM
EF80-200mm f/4.5-5.6 USM
●❸
●❶
●❷-●Ⓐ
●❷-●Ⓑ
●❹
●❺
Thank you for purchasing a Canon product.
Safety Precautions
1.
Do not look at the sun or a bright light source through
the lens or camera.
Doing so could result in loss of
vision. Looking at the sun directly through the lens is
especially hazardous.
2.
Whether it is attached to the camera or not, do not
leave the lens under the sun without the lens cap
attached.
This is to prevent the lens from concentrating
the sun’s rays, which could cause a fire.
Handling Cautions
If the lens is taken from a cold environment into a warm
one, condensation may develop on the lens surface and
internal parts.
To prevent condensation in this case, first
put the lens into an airtight plastic bag before taking it
from a cold to warm environment. Then take out the lens
after it has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting
and detaching the lens.
• After detaching the lens, place the lens with the rear end
up to prevent the lens surface and contacts from getting
scratched.
• If the contacts get soiled, scratched, or have fingerprints
on them, corrosion or faulty connections can result. The
camera and lens may not operate properly.
• If the contacts get soiled or have fingerprints on them,
clean them with a soft cloth.
• If you remove the lens, cover it with the dust cap. To
attach it properly, align the lens mount index and the

index of the dust cap as shown in diagram
❶
, and turn
clockwise. To remove it, reverse the order.
2. Setting the Focus Mode
To shoot in autofocus (AF) mode, set the focus mode switch
to AF
❹
.
To shoot in manual focus (MF) mode, set the focus mode
switch to MF, and focus by turning the focusing ring.
• Do not touch the rotating parts of the lens while AF is
active.
• Do not focus in MF when the focus mode switch is set to
AF.
• When the hood (sold separately) is installed to the EF55-
200mm f/4.5-5.6 USM, EF55-200mm f/4.5-5.6 II USM
and EF80-200mm f/4.5-5.6 USM, you can turn the hood
to adjust with MF.
3. Zooming
To zoom, turn the lens’ zoom ring
❺
.
• Be sure to finish zooming before focusing. Changing the
zoom ring after focusing can affect the focus.
Nomenclature
●①
Zoom ring
●②
Zoom position index
●③
Contacts
●④
Lens mount index
●⑤
Focus mode switch
●⑥
Focusing ring
EF Zoom Lenses
EF55-200mm f/4.5-5.6 USM
EF55-200mm f/4.5-5.6 II USM
EF80-200mm f/4.5-5.6 USM
EF75-300mm f/4-5.6 II USM
EF75-300mm f/4-5.6 III USM
EF90-300mm f/4.5-5.6 USM
Instructions
COPY

Canon EF80-200mm f/4.5-5.6 USM Specifications

General

Brand	Canon
Model	EF80-200mm f/4.5-5.6 USM
Category	Lenses
Language	English

Summary

Canon EF Zoom Lenses

Nomenclature

Details the different parts of the Canon EF Zoom Lenses, including zoom ring, contacts, and focus mode switch.

Safety Precautions

Important warnings regarding looking at the sun and preventing lens fires from concentrated sunlight.

Handling Cautions

Guidance on preventing condensation when moving the lens between environments of different temperatures.

Mounting and Detaching the Lens

Instructions on how to properly attach and remove Canon EF Zoom Lenses from the camera body.

Setting the Focus Mode

Explains how to set the focus mode switch to AF or MF for shooting and handling focus adjustments.

Zooming

Guidance on operating the zoom ring and the importance of finishing zooming before focusing.

Hood Usage

Instructions on attaching, securely turning, and reverse-mounting the lens hood for protection.

Filter Attachment

Information on attaching filters to the lens' filter mounting thread, recommending Canon polarizing filters.

Specifications Overview

Presents detailed technical specifications for various Canon EF Zoom Lenses, including dimensions and weight.