Canon ELPH 2 - Loading the Battery; Load the battery

[H Loading the Battery
Applicable Battery: One CR2 lithium battery
Open the battery cover.
• Push at ® and slide the
cover out until it stops 0 .
Then slowly open the cover
0 and remove.
2
Load the new battery.
• Ensure that the + and -
terminals are positioned
correctly
3
Reattach the cover.
• Clip the end of the cover in
place and press it down 0 .
Then slide the cover fully
closed 0.
^ The pil icon appears on
the LCD panel and the
date/time display m
blinks.
4 Adjust the date and
time. (-»40)
2
0-15