Operation problems
Settings change when I switch from still photo shooting to movie
recording or vice versa.
Separate settings are retained for use when shooting still photos and recording movies.
I cannot change the setting with < >, < >, < >, < >, or < >.
Set the power switch to < > ( ).
Check the [ 6: Multi function lock] setting ( ).
Settings cannot be changed with < >, < > or < > for vertical
shooting.
Set the vertical-grip On/Off switch to < > ( ).
Set [ 7: Smart controller] to [Enable] ( ).
Touch operation is not possible.
Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( ).
A camera button or dial does not work as expected.
Check the [ 6: Custom Controls] setting ( ).
897
To Next Page
Loading...
