How to resolve 'FTP server rejected connection' on Canon Digital Camera?
If the FTP server is rejecting the connection from your Canon Digital Camera, change the FTP server settings to allow access from the [IP address] configured on the camera in the TCP/IP settings.
How to fix 'No response from proxy server' on Canon Digital Camera?
If you are receiving a 'No response from proxy server' error, try the following: * If you are not using a proxy server, set the camera’s proxy server setting to [Disable]. * Configure the camera’s proxy server address and port number to match those of the proxy server. * If the proxy server’s [Address] setting is not configured on the camera, enter it along with the DNS server address.
Why does my Canon EOS-1D X say 'Duplicate IP address'?
This issue occurs when the camera uses the same IP address as another device on the network. To resolve this, change the camera’s IP address to a different one. If you are in a network environment with a DHCP server and the camera’s IP address setting is set to [Manual setting], change it to [Auto assign].
Why is my Canon EOS-1D X Digital Camera not getting an address from the DHCP server?
If your Canon Digital Camera is not receiving an address from the DHCP server, consider the following: * If you are not using a DHCP server, set the camera’s network setting to [Manual setting] and IP address setting to [Manual setting]. * Ensure the DHCP server is turned on. * Increase the number of addresses assigned by the DHCP server if there are not enough available. * Remove devices assigned addresses by the DHCP server from the network to reduce the number of addresses in use. * Check the DHCP server settings to make sure it is functioning correctly as a DHCP server.
How to troubleshoot no response from proxy server on Canon EOS-1D X Digital Camera?
If your Canon Digital Camera is experiencing no response from the proxy server, check the following: * If you are not using a proxy server, set the camera’s proxy server setting to [Disable]. * Ensure the camera’s [Address setting] and [Port No.] settings match those of the proxy server. Configure the camera’s proxy server address and port number to match those of the proxy server. * If the proxy server’s [Address] setting is not configured on the camera, enter it along with the DNS server address. * Verify that the proxy server is turned on. * Check the proxy server settings to make sure the server is functioning correctly as a proxy server.
What does it mean when another terminal has the same IP address as my Canon EOS-1D X Digital Camera?
If another terminal has the same IP address as your Canon Digital Camera, it means there's an IP address conflict on your network. Change the camera’s IP address to avoid using the same address as another device on the network. Alternatively, change the IP address of the device that has a redundant address.
Why can't I connect to the FTP server with my Canon EOS-1D X Digital Camera?
If you're unable to connect to the FTP server with your Canon Digital Camera, consider these points: * Ensure the FTP server’s IP address setting on the camera matches the server’s actual address. Configure the IP address on the camera to match the actual FTP server address. * Verify that the [Port number setting] for the FTP server on the camera matches the actual port number of the FTP server (usually 21). * If only the FTP server’s [Server name] is configured on the camera, enable use of the DNS server on the camera and enter its address. * Check that the computer is correctly configured to function as an FTP server. * Make sure the FTP server is turned on, as it might have been disabled due to an energy-saving mode. * If a firewall or other security software is enabled, ad...
What to do if my Canon EOS-1D X displays 'Connection target not found'?
If your Canon Digital Camera displays 'Connection target not found', check that EOS Utility is ready for pairing. Also, ensure the target computer is turned on and wait for a while.
What to do if Canon EOS-1D X Digital Camera shows 'No address assigned by DHCP server'?
If your Canon Digital Camera displays 'No address assigned by DHCP server', try the following: * If you are not using a DHCP server, set the camera’s network setting to [Manual setting] and IP address setting to [Manual setting]. * Turn the DHCP server on. * Increase the number of addresses assigned by the DHCP server. * Remove devices assigned addresses by the DHCP server from the network to reduce the number of addresses in use. * Check the DHCP server settings to make sure it is functioning correctly as a DHCP server. * Ask your network administrator to ensure that the DHCP server can be used.
What to do if my Canon EOS-1D X Digital Camera shows 'No response from DHCP server'?
If you encounter a 'No response from DHCP server' error, here are a few things you can try: * If you are not using a DHCP server, set the camera’s network setting to [Manual setting]. * Turn the DHCP server on. * Ensure the DHCP server is functioning correctly. * Ask your network administrator to ensure that the DHCP server can be used.
General| Camera Type | Digital SLR |
|---|---|
| Sensor Type | CMOS |
| Sensor Size | 36 x 24 mm |
| Effective Pixels | 18.1 MP |
| Image Resolution | 5184 x 3456 |
| ISO Range | 100-51200 (expandable to 50-204800) |
| Autofocus Points | 61 |
| Max Shutter Speed | 1/8000 sec |
| Shutter Speed | 30-1/8000 sec |
| Continuous Shooting Speed | 14 fps |
| Video Resolution | 1920 x 1080 |
| Video Recording | Full HD 1080p |
| LCD Screen Size | 3.2 inches |
| LCD Screen Resolution | 1, 040, 000 dots |
| Screen Resolution | 1, 040, 000 dots |
| Lens Mount | Canon EF |
| Battery | LP-E4N |
| Weight | 1340 g (body only) |
| Dimensions | 158 x 163.6 x 82.7 mm |
| Viewfinder Type | Optical (Pentaprism) |
| Storage Media | CompactFlash (CF) Type I/II |
| Battery Life | Approx. 1120 shots |
| Continuous Shooting | Up to 14 fps |
To Next Page
