Canon EOS 3000N User Manual

Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
• Remove the rear lens cap and the
camera body cap.
Mount the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch is set to
<MF> (or <M> on older lenses),
autofocus will not operate and <(ZQ>
will be displayed on the LCD panel.
Remove the front lens cap.
Canon
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• When the red dot on the lens Is at the
top, remove the lens.
Keep the removed caps where you will not lose them
An EF-S lens cannot be attached to the camera.
“AP stands for Autofocus.
“MP (or “M”) stands for Manual Focus.
18

Canon EOS 3000N Specifications

General

Lens Mount	Canon EF
Flash Sync Speed	1/90 sec
Battery	2 x CR123A
Shutter Speed	30 - 1/2000 sec
Focus Modes	Manual
Exposure Control	Program AE, Shutter priority AE, Aperture priority AE, Full manual
Metering Modes	Evaluative, Partial
Flash Modes	Auto, Red-eye reduction
Viewfinder	Eye-level pentamirror
Dimensions	145 x 92 x 62 mm