Canon EOS 5D Mark 2 - Page 64

Exposure Control
Shutter Speeds:
ISO Range:
Auto ISO:
Exposure Modes:
Full Auto Modes:
Metering:
Metering Range:
Exposure Compensation:
Auto Exposure Bracketing:
Automatic Image Correction Tools:
Flash
Compatible Flashes:
Camera Menu Sets Flash:
E-TTL II Flash Metering:
Wireless E-TTL:
Flash Exposure Compensation:
Built-in Flash:
Sync Contacts:
64
VIII. SPECIFICATIONS
30 seconds ~ 1/8000, plus Bulb; x-sync at 1/250 sec.
ISO 100 ~ 6400; (Expandable – L:50; H1: 12,800; H2: 25,600)
ISO 100 ~ 3200
Manual, Aperture Priority (Av), Shutter Priority (Tv), Program AE, and camera user (C1,
C2 settings)
Green Zone, Portrait, Landscape, Close-up, Action, Night Portrait, Flash Off, Creative Auto
35-zone metering sensor
• Evaluative Metering (linked to active AF points)
• Center-weighted Metering
• Partial Metering (Center, approx. 8% of viewfinder)
• Spot Metering (Center, approx. 3.5% of viewfinder area)
EV 1 ~ 20 (all patterns at normal temperatures)
Possible in P, Tv, Av, and A-DEP Exposure Modes
± up to 2 stops, in 1/2 or 1/3-stop increments
Possible in P, Tv, Av, and A-DEP Exposure Modes
± up to 2 stops, in 1/2 or 1/3-stop increments
• Auto correction of Lens Periphery Illumination
■
Correction for specific lenses can be registered in camera using Canon EOS Utility software
• Auto Light Optimizer
• Highlight Tone Priority Mode
All Canon EX-series Speedlites
Yes (580EX II, and 430EX II only)
Flash metering NOT linked to active AF point, Distance from compatible EF lenses now used
Fully compatible
Up to ±2 stops in 1/3 or 1/2 stop increments
N/A
• Accessory shoe: X-sync contact (syncs at 1/200 sec. or slower)
• PC terminal
■
X-sync at 1/125 sec
Sync duration: Since large studio flash systems have different flash duration times, tests should be done before-
hand to determine precise sync speed (1/125 ~ 1/30 sec.)
■
No polarity
Both the accessory shoe and PC terminal can be used simultaneously