settings and how to shoot and playback images.
Instruction Manual.
White index
Red index
1
2
3
4
5
6
7
8
9
Quick Start Guide
Insert the battery.
Set the lens focus
mode switch to <
f
>.
Open the cover
and insert a SD
card.
Attach the lens.
Align the lens’ white or red
index with the camera’s index
in the matching color.
Set the power switch to
<
1
>, and while holding
down the button at the
center of the Mode Dial, turn
the dial to <
1
> (Full Auto).
Flip out the LCD
monitor.
Focus the subject.
Aim the viewfinder center over the
subject and press the shutter
button halfway to autofocus.
Take the picture.
Press the shutter button
completely to take the
picture.
View the image.
The captured image will be
displayed for about 2 sec. on
the LCD monitor.
The
M
on the right of the function indicates that the function is
available only in Creative Zone modes (
d
,
s
,
f
,
a
,
F
,
w
).
Battery Life
Temperature No Flash 50% Flash Use
At 23°C / 73°F Approx. 1600 shots Approx. 1100 shots
Select image
x
Playback
56
Erase
L
B
Shooting information
yuyu
9
0
Image Playback
MagnifyIndex
<M> button
<0> button
<U> <V>
LCD
monitor
Preparation
Menu Operations
Creative Zone
Modes
Basic Zone Modes Movie Shooting Mode
1. Press the <M> button to display the menu.
2. Press the <U> key to select the tab, then press the
<V> key to select the desired item.
3. Press <0> to display the setting.
4. After setting the item, press <0>.
Tab
Menu settingsMenu items
Select [1 Quality].
Select the image-recording quality with the <6> dial or
<U> key.
Image-recording Quality
A
Picture StyleN
For <S> (Neutral) and <U> (Faithful), see the
camera’s instruction manual.
Style
P Standard
Q Portrait
R Landscape
V
Monochrome
Description
Vivid colors and sharp images.
Nice skin tones and slightly sharp images.
Vivid blue skies and greenery and very sharp images.
Black-and-white images.
Select [2 Picture Style].
Press the <V> key to select the
Picture Style, then press <0>.
Image-recording quality
Pixels
Possible shots
RAW: Turn the <6> dial
to select the quality.
JPEG: Press the <U> key
to select the quality.
Shutter speed
Aperture
Drive mode
ISO speed
AF mode
Exposure
compensation/
AEB setting
Highlight tone
priority
AF point
Picture Style
White balance
Electronic level
Metering mode
Image-recording
quality
Custom Controls
Auto Lighting
Optimizer
Flash exposure
compensation
Shooting mode
Q
Quick Control Screen
Press the <Q> button.
The Quick Control screen will
appear.
Electronic Level
Each time you press the <B>
button, the screen display will
change.
Display the electronic level.
Press the <V> <U> key to select the function, then turn
the <6> or <5> dial to set it.
In Basic Zone modes, the selectable functions may differ
depending on the Basic Zone shooting mode.
C.Fn I: Exposure
1 Exposure level
increments
2 ISO speed setting
increments
3 ISO expansion
4 Bracketing auto cancel
5 Bracketing sequence
6 Safety shift
7 Flash sync. speed in Av
mode
C.Fn II: Image
1 Long exposure noise
reduction
2 High ISO speed noise
reduction
3 Highlight tone priority
C.Fn III: Autofocus/Drive
1 Lens drive when AF
impossible
2 AF point selection
method
3 Superimposed display
4 AF-assist beam firing
5 Mirror lockup
C.Fn IV: Operation/Others
1
AF and metering buttons
2 Assign SET button
3 Dial direction during
Tv/Av
4 Focusing Screen
5 Add image verification
data
Custom Functions
To Next Page
Need help?
General
Weight and Dimensions
