1
July 2017
Using an EOS C200 / C200B Camera with a PL Mount
Using an EOS C200 / C200B Camera with a PL Mount
After replacing the EF lens mount of a Canon Digital Camera EOS C200 / C200B with a PL mount, you will not be able to use some
functions. This document details the main differences from the explanations in the Instruction Manual of the camera.
Attaching and Removing a PL Lens
The precautions to follow when attaching/removing a PL lens are the same as explained for an EF lens. Refer to
Preparing the Lens
in the Instruction Manual (A 37).
Names of Parts
Attaching a PL Lens
1 Holding a bayonet ring handle, turn the bayonet ring counter-clockwise to
remove the camera’s body cap.
• Remove also the dust caps from the lens.
2 Attach the lens to the camera aligning a groove on the lens with the PL lens
index pin on the mount.
3 Turn the bayonet ring clockwise to fix the lens in place.
1 Bayonet ring handles
2 PL Lens index pin
3 Bayonet ring
4 PL Lens mount
햲
햳
햴
To Next Page
