1
Firmware Update Procedure
Digital Cinema Camera
EOS C200
EOS C200B
This document explains the procedure and cautionary notes for updating (overwriting) the firmware of the EOS
C200 or EOS C200B Digital Cinema Camera.
*Firmware is software installed to control the equipment. it is the firmware that handles many of the camera's operations, such as
shooting or image processing.
Step 1: Prepare items required for the update
To start with, please prepare the following items.
Camera Body EOS C200 or EOS C200B
Computer (Windows: 10, 8.1, 8, 7 SP1 / Mac OS: 10.7 to 10.13)
Memory card (128 MB or higher capacity SD/SDHC/SDXC commercially available memory card)
Memory card reader/writer (commercially available SD card reader or SD card slot built into the computer)
BP-A30 battery pack (supplied with the camera)
CA-A10 AC adapter (supplied with the camera)
IMPORTANT: Precautions for updating the firmware
If the firmware update is not performed correctly, the camera may stop working.
Please be sure to carefully read the important points below, and perform operations in accordance with
the following operating procedure.
All camera settings will be reset when you perform the firmware update.
It is not possible to revert the firmware back to a previous version after you have performed the
firmware update.
Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source
during the firmware update. Doing so may cause the camera to malfunction.
To Next Page
Need help?
General
