74
9Silencing the Beeper
The beeper can be silenced in all of the picture-taking modes.
1
Move the <7> arrow to the <9>
icon.
•
Look at the LCD panel and press the
<0> button. (1)
2
Set the setting to “W”.
•
Turn the <l> dial.
•
To enable the beeper to sound, set to
“E”.
•
Press the shutter button halfway to
return to normal camera operation.
LCD panel illumination is provided.
Press the <b> button to illuminate the
LCD panel for about 5 sec. The
illumination can be turned off by
pressing the button again. Turn on the
illumination when it is too dark to see
LCD panel. The illumination turns off
automatically after the picture is taken.
bLCD Panel Illumination
If you use any button or dial for shooting while the LCD panel is illuminated,
the illumination time will be extended.
To Next Page
Loading...
Need help?
General
