VI. SPECIFICATIONS 23
S
HUTTER
FLASH
DRIVE SYSTEM
LCD MONITOR
IMAGE PLAYBACK
IMAGE PROTECTION
AND ERASE
T
ype:
V
ertical-travel, mechanical, focal-plane shutter with all speeds electronically-
c
ontrolled
S
hutter Speeds:
1
/8000 to 30 sec. (1/3-stop increments), X-sync at 1/200 sec.
S
hutter Release:
S
oft-touch electromagnetic release
S
elf-Timer:
1
0 sec. or 2 sec. delay
R
emote Control:
R
emote control with N3 type terminal
EOS-dedicated Speedlite: E-TTL II autoflash with EX-series Speedlite
PC Terminal: Provided
Drive Modes: Single, Continuous (approx. 3 fps), Self-timer
Continuous Shooting Speed: Approx. 3 fps (at 1/250 sec. or faster for all recording
quality settings)
Max. Burst: JPEG: approx. 60 frames (JPEG/Large), RAW: approx. 17 frames, RAW+JPEG:
approx. 12 frames
Type: TFT color liquid-crystal monitor Monitor Size 2.5 in.
Pixels: Approx. 230,000
Coverage: 100% f
or JPEG images
Brightness Adjustment: 5 levels provided
Image Display Formats:
(1) Full screen image with no info
(2) Full screen image with info
(3) Thumbnail image with detailed info & histogram
(4) Index display (9 thumbnail images)
(5) Magnified zoom display (approx. 1.5x to 10x)
(6) Auto play (slide show)
(7) In
stant review after shooting
Highlight Alert: In the single image (INFO) mode, the highlight portions containing no
image information will blink
Protection: A single image can be protected or unprotected
Erase: A single image or all images stored in a CF card can be erased if they are
unprotected
To Next Page
Loading...
