33
Advanced
Functions
E
Set the date and time display when you first start using your camera. As long as you have
inserted the backup battery (p. 58), the camera’s internal clock will continue to work even when
the main power source is removed.
1. Open the camera menu to screen 2 and choose the DATE SET option.
• The year display starts flashing.
2. Press the controller up and down to change the year. Press sideways to move
to another part of the display.
• Press once to scan a year at a time. Press and hold to scan quickly.
• Once you move from the year, the next part of the display starts flashing.
3. Set the months, days, hours, and minutes in the same way.
•After you set the minutes, press the SET (or MENU) button to start the clock; the camera
displays the date and time for about 3 seconds and then automatically returns to the
camera menu.
•You can use the SET button to return to the camera menu, at any stage of setting the
clock.
4. Press the MENU button to close the menu.
Notes:
• The display can be set to any year between 2002 and 2050.
• In addition, you can assign CUSTOM KEY 1 to choose whether to add the date and time to your
recordings (see p. 29). Once assigned, press the CUSTOM KEY to choose between auto–10s, off,
and continuous display styles (each in turn).
Setting the date and time
You can choose between three different date/time displays at the camera menu.
DATE&TIME
DATE
TIME
Choosing the display style
To Next Page
