Canon FPD-400D - Page 17

- 32 -
(
NOTE) : This operation cannot be used for “A” type lens when
the focus demand FPD-400D is connected. (See §2.
MOUNTING and CONNECTING.)
However, this operation can be used when the focus
positional servo module is connected. Follow the
connection procedure for the “R” type lens.
STANDARD Mode (switch at left side) : Standard characteristics where the
focus lens group moves linearly when
the knob is rotated.
FAR Mode (switch at right side) : Curve characteristics where the focus
lens group exhibits less movement as
it approaches the FAR end when the
knob is rotated. This mode makes it
easy to perform fine adjustment at the
FAR end.
STANDARD Mode
Knob Position
Focus Position
FAR Mode
FAR
NEAR
FPD-400DFPM-420DE-0819.indd32 2010/08/2016:09:04