Need help?Do you have a question about the Canon i-SENSYS MF4340d and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Scan Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed |
| Copy Resolution (Black) | 600 x 600 dpi |
| Duplex Printing | Yes |
| Monthly Duty Cycle | 30, 000 pages |
| Paper Capacity | 250 sheets |
| Functions | Print, Copy, Scan, Fax |
| Fax Transmission Speed | 33.6 kbps |
| Memory | 64 MB |
| Operating System Compatibility | Windows, Mac |
| Interface | USB 2.0 |
Details on parts, specifications, and functions like scanning and recording ranges.
Guidelines for safe operation and handling of machine components, including laser and toner.
Overview of machine construction and function configuration.
Explains the basic operation sequence of the machine from power-on to motor stop.
Details on specifications, components, and function list for the exposure system.
Step-by-step instructions for replacing scanner unit and reader motor components.
Explains the basic operation for the Automatic Document Feeder (ADF) and DADF.
Describes sensor types for original presence and end detection within the ADF/DADF.
Details on jam detection criteria and release procedures for the feeding system.
Procedures for removing ADF/DADF pickup rollers, motors, and separation pads.
Explains the laser scanner assembly, its components, and relevant error codes.
Details on laser ON/OFF control and timing mechanisms.
Explanation of the Auto Photoelectric Current Control (APC) for laser intensity.
Covers scanner motor speed control and fault detection procedures.
Step-by-step instructions for removing the laser scanner unit.
Describes the image forming system, its components, and the print process.
Details on the generation and application of transfer charging bias.
Explanation of the toner level detection mechanism using a magnetic sensor.
Instructions for removing the transfer charging roller.
Explains the pickup/feeding system, its components, sensors, and motors.
Details on pickup/feed operation sequences and control mechanisms.
Classification and detection methods for various jam types in the feeding system.
Overview of the duplexing pick-up operation and related components.
Procedures for replacing main motor, separation pad, and pickup roller.
Details on the fixing method, heater, thermistor, and protection functions.
Explains fixing temperature control modes and paper size-based fixing modes.
Describes CPU, safety circuit, and temperature fuse protection mechanisms.
Instructions for removing the fixing assembly and fixing film unit.
Overview of the machine's control panel, its components, and SCNT PCB control.
Details on the power supply route and protection functions against overcurrent/overvoltage.
Covers replacement of external covers and internal PCBs like SCNT and DCNT.
Information on parts requiring periodic replacement.
Details on any scheduled periodic service items.
Cleaning methods for external covers, ADF, and reader unit components.
Procedures for adjusting paper margins, reading alignment, and print position.
Lists solenoids, motors, sensors, and PCBs used in the machine for troubleshooting.
Explains error code types and provides a list of system, scanner, printer, and communication errors.
Details on setting service data, activating service mode, and available menu items.
Explanation of soft switch settings, their functions, and bit elaborations.
Information on performing faculty tests, sensor tests, and key tests.
Lists solvents and lubricants recommended for machine maintenance and cleaning.
To Next Page