6
When the target operation is completed, then select <Disconnect>.
◼ Connecting Using the NFC (Android)
Before using the NFC, check whether <Use NFC> is set to <On>.
<Use NFC>(P. 566)
1
Select <Mobile Portal> in the Home screen. Home Screen(P. 122)
● When any mobile device is already connected, proceed to step 3.
2
Select <Start>.
3
Launch Canon PRINT Business on the mobile device. Utilizing the Machine through
Applications(P. 332)
4
Enable the NFC settings of the mobile device.
5
Move the mobile device closer to the NFC mark of the machine. Operation
Panel(P. 114)
6
When the target operation is completed, then select <Disconnect>.
● Select <Connection Information> on the <Direct Connection> screen to check the connected mobile device.
● While connecting via direct connection, you may not be able to connect to the Internet depending on the
mobile device you are using.
● If wireless connection from the mobile device is not performed within 5 minutes while the SSID and network
key are displayed, the connection waiting state terminates.
Linking with Mobile Devices
330
To Next Page
Loading...
