Canon imageCLASS MF733Cdw - Page 487

<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Drop
Pattern Reduction Mode> <On> <Yes>
● If you set to <On>, print quality may be affected.
<Correct Image Corrupted by Ppr Dust>
*
Using paper containing much paper dust may result in a faded or streaky printout. In this case, setting this item
to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Correct Image Corrupted by Ppr Dust> <On> <Yes>
● If you set to <On>, the printing speed may be slower.
<Correct Blurry Image>
*
When performing 2-sided printing, the image may be blurry on the back side of paper in the trailing edge. In
this case, setting this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Correct Blurry Image> <On> <Yes>
● If you set to <On>, the printing speed may be slower.
<Prevent Fogging>
If white areas are lightly colored, setting this item to <On> may solve the problem.
Setting Menu List
479