Configure the fax settings, according to the screen
below.
1.
Press <Fax>.
2.
Press <Set Up Now>.
3.
Register the machine's telephone number (fax
number) and abbreviated user name.
• The information below will be printed at
the top part of the paper output from the
destination machine as sender information.
02/02 2017 10:00AM CANON123XXXXXXXFAX 0001
Sent Time Unit Name Page Number
Number's Type
Fax Number
4.
Set the reception mode.
• Make the setting by answering the questions
on your purposes of using the fax function.
5.
Connect to a telephone line.
A
B
C
Telephone line jack
Telephone
Handset (optional)
6.
Press <End>.
7.
Press <Yes>.
Now you are finished
with the configuration.
CAUTION!
When you load paper of a size other than A4,
change the paper settings.
Steps 5 and 6 in
"Loading in the Paper Drawer" on P.32
For details
"Configuring Initial Settings for Fax Functions" in the User's Guide
11
Configuring Fax Settings
Quick Setup
En
To Next Page
Loading...
