14
TroubleshootingTroubleshooting
Phenomenon Cause Corrective Action
Lines are misaligned The Printhead alignment is not
adjusted.
Adjust the Printhead alignment.
(→
, If Vertical Lines are Warped or Colors are
Misaligned)
(→"Manual Adjustment to Straighten Lines and Colors
(Head Posi. Adj.)," User Manual)
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Make sure the same type of paper is specified in the
printer driver as you have loaded in the printer.
Load paper of the same type as you have specified in
the printer driver.
Press the Stop button and stop printing.1.
Change the type of paper in the printer driver and
try printing again.
2.
(→
, Loading Rolls in the Printer)
(→
, Loading Sheets in the Printer)
The Printhead is set too high in the
Control Panel menu.
In the Control Panel menu, use a lower Head Height
setting.
(→"Troubleshooting Paper Abrasion and Blurry
Images (Head Height)," User Manual)
Depending on the type of paper,
printed lines may be noticeably
misaligned.
Select High-Precision Text and Fine Lines in the
printer driver.
(→"Giving Priority to Particular Graphic Elements and
Colors for Printing," User Manual)
To Next Page
Loading...
Need help?
General