Canon imagePROGRAF TM-305 Setup Guide

10
7
When the paper feed is nished, the printer automatically starts
charging the ink for the rst time and adjusting the print head.
This takes about 25 minutes.
During this time, install the software on the computer. (Refer to
"Connecting to the Printer" on p.12)
Note
• Charging the system with ink lls the system from the ink
tanks to the print head. In addition, cleaning is performed
to keep the printer in optimal condition. This may cause the
remaining ink indicator and maintenance cartridge capacity
indicator to drop some amount. Starter ink tanks are for
rst-time installation. It is recommended that you purchase
replacement ink tanks quickly.
8
When the print head adjustment is complete, the paper with the
adjustment pattern printed on it is ejected.
Instructions on how to remove paper will be displayed on the
touch screen. Perform the rest of the procedure by following the
instructions.
Important
• Do not operate the release lever until the instruction on
removing paper is displayed on the touch screen. If you
operate the release lever while printing is in progress, the
printing will stop in the middle.

Canon imagePROGRAF TM-305 Specifications

General

Max Print Resolution	2400 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Printer Type	Large Format Printer
Ink Droplet Size	5 picoliters
Memory	2 GB
Operating System	Windows, Mac OS
Power Supply	AC 100-240V, 50/60Hz
Number of Ink Colors	5
Media Handling	Roll feed
Max Media Width	36 inches
Hard Drive	500 GB
Number of Nozzles	15, 360
Nozzle Pitch	1200 dpi
Ink Tank Capacity	130 ml per color
Media Thickness	0.07 to 0.8 mm
Media Core Size	2 inches
Media Sizes	A4, A3, A2, A1, A0
Media Types	Plain Paper, Coated Paper, Glossy Photo Paper, Satin Photo Paper
Ink Type	Pigment ink