Need help?Do you have a question about the Canon imageRUNNER 2520 Series and is the answer not in the manual?
General| Print Speed | 20 ppm (A4) |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm (A4) |
| Copy Resolution | 600 x 600 dpi |
| Paper Capacity (Standard) | 250 sheets |
| Maximum Paper Size | A3 |
| USB Connectivity | USB 2.0 |
| Type | Laser All-in-One Printer |
| Functions | Print, Copy, Scan |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 kbps |
| Network Connectivity | Optional |
| Memory | 128 MB |
| Paper Sizes | A4, A5, B5, Legal, Letter, Executive, Statement |
| Paper Weight | 64 to 90 gsm |
| Multiple Copies | Up to 99 copies |
| Scan Destinations | USB, Network |
| Interface | USB 2.0 |
| Monthly Duty Cycle | Up to 30, 000 pages |
| Zoom | 25-400% in 1% increments |
Explains the laser safety classification and confinement of radiation within the machine according to IEC60825-1.
Provides safety precautions for servicing the laser assembly, including warnings about Class 3B laser beams and protective measures.
Provides a caution regarding the use of extension cords and the installation of socket-outlets near the equipment.
Provides critical safety notes before servicing, including turning off power and not interrupting downloads.
Outlines essential procedures and precautions for assembling and disassembling the device, including static electricity.
Provides detailed specifications for the machine's various components, including paper handling, power consumption, and dimensions.
Describes the machine's functional configuration and basic sequences for power-on and printing.
Details the specifications, controls, functions, and major components of the original exposure system.
Explains the functional configuration of the controller system, including its components and their specifications.
Details the specifications, major components, and image formation process of the machine's image formation system.
Explains the features, specifications, major parts configuration, and temperature control overview of the fixing system.
Provides specifications, parts configuration, arrangement of sensors, and route of drive for the pickup/feed system.
Describes the product overview, features, setup, and network settings for the Embedded RDS system.
Provides guidance on troubleshooting communication test failures and error codes related to E-RDS.
Lists consumable and cleaning parts, their part numbers, life intervals, and replacement/cleaning procedures.
Describes adjustments required in field service when replacing parts, categorized by system.
Provides procedures for adjusting basic image position, including margins and non-image areas.
Details actions to take after replacing CIS unit, platen glass, ADF scan glass, and main/DC controller PCBs.
Explains actions after replacing the main controller PCB and DC controller PCB, including RAM clearing.
Details actions to take after replacing the laser scanner unit, including service mode adjustments.
Provides a list of initial check items for the site environment, paper, and each unit's function.
Lists common troubleshooting items, categorizing them by image failure and operation failure.
Describes available methods for upgrading system software, including PC-based and finisher upgrades.
Details various error codes, their descriptions, causes, and remedies for fixing temperature and rotation issues.
To Next Page