Optional accessories
Optional accessories
Roll Holder Set
A set of parts comprising the Roll Holder and Holder Stopper . If you want to prepare a few rolls with paper of
various types and widths for dif ferent purposes, it is convenient to have several sets ready . Sets are available
for 2- and 3-inch paper cores. (2-inch versions match the set included with the printer .)
• Roll Holder Set RH2-63 (for 2-inch paper cores)
• Roll Holder Set RH3-63 (for 3-inch paper cores): Optional
Output Stacker
A cloth tray that catches ejected documents. (Optional)
• Output Stacker BU-01
For instructions on installing the Output Stacker , refer to the Quick Start Guide .
IEEE 1394 (FireW ire) Expansion Board
An optional interface board to add an IEEE 1394 (also called "FireWire") port.
• IEEE1394 Expansion Board EB-05
Note that EB-04 is incompatible.
For instructions on installing the IEEE 1394 expansion board, refer to the documentation provided with the
IEEE 1394 expansion board.
132 Printer parts
To Next Page
Loading...
Need help?
General