How to replace the printhead - iPF605
Description
How to replace the printhead - iPF605
Solution
Replacing the Printhead (iPF605)
- Do not touch the Printhead immediately after printing. The Printhead becomes extremely hot, and
there is a risk of burns.
- Prepare a new Ink Tank when ink levels are low.
- Your hands may become dirty during Printhead replacement. Use the gloves provided with the
new Printhead for replacement.
- Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after
replacement of the Printhead.
1. Press the Menu button to display MAIN MENU .
2. Press or to select Maintenance , and then press the button.
3. Press or to select Replace P.head , and then press the button.
4. Press or to select Yes , and then press the OK button.
Ink is now filled.
After about three minutes, a message is shown on the Display Screen instructing you to open the
Top Cover .
Instructions are now shown on the Display Screen regarding Printhead replacement.
6. If the Printhead Fixer Cover or Printhead Fixer Lever is dirty, use a damp cloth that you have
wrung out completely to wipe it clean.
To Next Page
Need help?
General
