Preparations 37
Relay Recording of Movies
You can activate the relay recording so if the memory you are using
becomes full while recording movies, the recording will continue auto-
matically on a memory card.
When recording on memory card X, you can use memory card Y for
relay recording (497). / / only: When recording in the
built-in memory, you can choose to use only memory card X for relay
recording (f94), or use both memory cards (f9497).
1 Insert a memory card that contains no video recordings into the
card slot of the memory card you want to use for relay recording.
• When relay recording from the built-in memory ( / /
only): memory card slot X or both memory card slots.
• When relay recording from memory card X: memory card slot
Y only.
2 Activate the relay recording.
* The approximate available recording time will now reflect the combined space in
the memories used for relay recording.
NOTES
• / / You cannot use relay recording from the built-in
memory to memory card Y. When using a single memory card, be sure
to insert it into memory card slot X.
• There will be a momentary stop in the scene at the point where the
recording switched to a different memory.
• Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the camcorder's operating mode.
- Changing the memory used for recording movies.
Operating modes:
[FUNC.]
8
[MENU]
8
8
8
[Rec Media for Movies]
8
[
f
] ( / / only) or [
4
]
8
[Relay Recording]
8
Desired option*
8
[
a
]
To Next Page
Loading...
Need help?
General