Need help?Do you have a question about the Canon MiniTT1 and is the answer not in the manual?
General| Brand | Canon |
|---|---|
| Model | MiniTT1 |
| Category | Camera Accessories |
| Language | English |
Explains using remote E-TTL II flashes as one zone of light with no flash on the camera.
Details how to set up E-TTL II wireless flash with a master flash mounted on the MiniTT1.
Details setting up E-TTL II ratio wireless flash with a master flash on the MiniTT1.
Discusses factors for using ControlTL to extend Canon's wireless functionality.
Details triggering remote speedlites in manual mode and potential error indicators.
Explains connecting manual flashes using sync cables or adapters to the FlexTT5.
Controls when remote E-TTL II flashes sleep relative to the camera.
Keeps connected flashes awake for a set period after radio activity.
Enables specific Canon flashes to act as masters to trigger remote flashes.
Allows setting the camera model for auto-calibration or manual selection.
Disables the bottom shoe on a FlexTT5 to prevent it from acting as an Auto-Relay transmitter.
Provides a detailed list of Standard and ControlTL channel frequencies.
Discusses battery drain, field learning, and incompatible devices for LEARN mode.
Explains how to trigger flashes in sync with a remote camera using relay mode.
Discusses exposure bouncing, TTL/E-TTL display, and shutter speed limitations.
Compares specifications like ports, voltage, mounting, dimensions, and weight for both units.
To Next Page