Name: Canon MX470 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Note

• This setting may not be available depending on the country or region of purchase.

Adv. FAX settings

• Auto redial

Enables/disables automatic redialing.

If you select ON, you can specify the maximum number of redial attempts and the length of time the

machine waits between redial attempts.

• Dial tone detect

Avoids mistransmission when reception and transmission occur at the same time.

If you select ON, the machine transmits the fax after confirming the dial tone.

Note

• This setting may not be available depending on the country or region of purchase.

• Pause time settings

Sets the length of pause time for each when you enter "P" (pause).

• TTI position

Selects the position of the sender information (outside or inside the image area).

• Remote RX

Enables/disables remote reception.

If you select ON, you can specify the remote reception ID.

Remote Reception

• Color transmission

When faxing color documents using the ADF, selects whether to convert them into black & white data

if the recipient's fax machine does not support color faxing.

If you select If incompatible, end, the machine does not send color documents when the recipient's

fax machine does not support color faxing.

• RX image reduction

Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.

If you select ON, you can select the image reduction direction.

• Adv. communication

◦ ECM TX

Selects whether to send faxes in Error Correction Mode (ECM).

Transmission/Reception of Faxes Using ECM

◦ ECM RX

Selects whether to receive faxes in Error Correction Mode (ECM).

155

Questions and Answers:

Need help?

Do you have a question about the Canon MX470 series and is the answer not in the manual?

Canon MX470 series Specifications

General