Name: Canon MX470 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Using the Rotary Pulse Line

• Dialing by Using the On Hook Dial Function

Note

• You can use the on hook dial function only when On-hook setting in Security control under

Fax settings is set to Enable.

Security control

1. Make sure that the machine is turned on.

2. Press the FAX button.

The Fax standby screen is displayed.

3. Press the Color button or the Black button.

4. Use the Numeric buttons to dial the number of the information service.

5. When the recorded message for the information service answers, press the Tone button to

switch to tone dialing.

6. Use the Numeric buttons to press the numbers in accordance with the message.

7. Press the Stop button to finish using the service.

• Dialing by Using the Telephone Connected to the Machine

1. Make sure that the machine is turned on.

2. Press the FAX button.

The Fax standby screen is displayed.

3. Lift the handset of the telephone.

4. Use the telephone to dial the number of the information service.

5. When the recorded message for the information service answers, use the telephone to switch to

tone dialing.

When you dial the number of the information service using the telephone connected to the

machine, you cannot use the machine to switch to tone dialing. For instructions on how to switch

to tone dialing, refer to your telephone's instruction manual.

6. Use the telephone to press the numbers in accordance with the message.

7. Hang up the handset to finish using the service.

499

Questions and Answers:

Need help?

Do you have a question about the Canon MX470 series and is the answer not in the manual?

Canon MX470 series Specifications

General